States of matter and kinetic molecular theory: Grade 10 Past Paper Questions

20 past paper questions on states of matter and kinetic molecular theory from KwaZulu-Natal, 2023–2026. Read what each one asks, then open it with its memo.

Search all 20 in the browser All Physical Sciences topics

Questions

10 questions on states of matter and kinetic molecular theory. Each opens in the question browser with its memo.

2025 · Paper 2 · June · KwaZulu-Natal · Question 1

1.5 Consider the following statements regarding a substance in the solid state: (i) Solids have a fixed shape. (ii) Solids have a fixed volume. (iii) The particles in a solid are not in motion. (iv) A solid occupies the entire volume available. Which of the above statements is/are TRUE? A. (i) and (ii) only. B. (i), (ii) and (iii) only. C. (i), (iii) and (iv) only. D. (i) and (iii) only.

states of matterproperties of solidskinetic molecular theory
Open this question
2025 · Paper 2 · June · KwaZulu-Natal · Question 2

2.1 A learner adds 5 drops of red food colouring into a beaker filled with 100 ml cold water (see figure 1). The entire solution turns red after 7 minutes as shown in figure 2. 2.1.1 Explain why the entire solution becomes red after a period of time. 2.1.2 Is the solution in Figure 2 a MIXTURE or PURE SUBSTANCE? 2.1.3 Is the process occurring above a PHYSICAL or CHEMICAL change? Provide a reason for the answer. 2.1.4 5 drops of the same food colouring is now added to a beaker of 100 ml HOT water. Use the kinetic molecular theory to explain why the time taken for the entire solution to turn red is less than 7 minutes.

diffusionkinetic molecular theorymixtures and pure substancesphysical change
Open this question
2024 · Paper 2 · June · KwaZulu-Natal · Question 3

A grade 10 learner removes 50 grams of crushed ice from the freezer and records the temperature changes it experiences as the water is left out to warm. The results obtained are shown in the table below: at 0, 5, 10, 15, 20, 25, 30, 35, 40, 45 and 50 minutes the temperature is −7, −3, 0, 0, 3, 7, 12, 16, 20, 25 and 25 °C. 3.1 Identify the phase change occurring between 10 and 15 minutes. 3.2 What instrument is used to measure the average kinetic energy of the particles? 3.3 Why is it preferable to use crushed ice instead of ice cubes for this investigation? 3.4 Explain in terms of temperature, energy and movement of particles, the changes that occur between 20 and 45 minutes. 3.5 Why does the temperature remain constant after 45 minutes? 3.6 Write down the phase of water at 50 minutes.

heating curvesphase changesmeltingkinetic molecular theorytemperature and kinetic energy
Open this question
2023 · Paper 2 · June · KwaZulu-Natal · Question 3

3.1 The heating curves for 2 different substances, A and B, are drawn on the same set of axes in the graph below. The graph is not drawn to scale. 3.1.1 Define the term boiling point. 3.1.2 Write down the boiling point of substance B. 3.1.3 At which point, X or Y, are the particles closer together in substance B? Explain fully. 3.1.4 Which substance, A or B, has stronger forces between the particles in their solid phase? Give a reason for the answer. 3.1.5 It can be seen from the graph that the temperature of substance A remains constant from t₃ to t₄. Explain this observation. 3.2 Use the Kinetic Molecular Theory to explain the rise of mercury in the thermometer, when the temperature increases.

heating curvesboiling pointkinetic molecular theoryintermolecular forcesphase changes
Open this question
2026 · Paper 2 · June · KwaZulu-Natal · Question 2

Study the temperature versus time graph for acetone and answer the questions that follow. The boiling point of acetone is 56 °C and its melting point is −95 °C. The graph is NOT drawn to scale. 2.1 Is the above graph a heating curve or cooling curve of acetone? Give a reason. 2.2 Define melting point. 2.3 In what phase (gas, liquid or solid) are the particles at: 2.3.1 section A. 2.3.2 room temperature (25 °C). 2.4 On section B on the graph, there is no temperature change. Explain this observation. 2.5 Name the processes that take place at the following time intervals: 2.5.1 10 s – 20 s. 2.5.2 30 s – 40 s.

cooling curvesmelting and boiling pointsphase changescondensation and freezing
Open this question
2025 · Paper 2 · November · KwaZulu-Natal · Question 2

2.1 Two hypothetical gases, X₂ and Y₂, react in a closed container to form XY gas according to the equation: X₂(g) + Y₂(g) → 2XY(g). After the reaction, the container is found to contain both XY gas and some unreacted Y₂ gas. 2.1.1 Would you classify the contents of the container, after the reaction, as a MIXTURE or a PURE SUBSTANCE? 2.1.2 To separate XY from Y₂ the following steps take place: STEP 1: The contents of the container is cooled to liquify BOTH gases. STEP 2: The liquid is thereafter gradually heated to a maximum temperature of −60 °C, to separate Y₂ and XY. The boiling point of Y₂ is −180 °C and of XY is −50 °C. (a) At which temperature will both gases be in their liquid phase? Choose from: 20 °C, −70 °C, −190 °C. (b) Which of the two substances, Y₂ or XY, will more easily be converted to gas when the temperature is increased in STEP 2? (c) Does STEP 2 represent a PHYSICAL or CHEMICAL change? Explain the answer. (d) The substance that is more easily converted to gas is collected. It is observed that the collected gas is not 100% pure. Give a reason for the observation.

mixtures and pure substancesboiling pointseparation of mixturesphysical change
Open this question
2025 · Paper 2 · November · KwaZulu-Natal · Question 3

3.1 The white ring of ammonium chloride forms closer to the HCl end of the tube than the middle. 3.1.1 Define the term diffusion in words. 3.1.2 Provide a reason why the white ring formed closer to HCl than NH₃. 3.1.3 The temperature of the gases in the glass tube is now increased. How would this affect the TIME taken for the white ring to appear? Choose from INCREASE, DECREASE or REMAIN THE SAME. Explain the answer using the kinetic molecular theory. 3.2 The heating curve of hydrochloric acid (HCl) is represented by the graph below, with flat sections at −114,2 °C and −85,1 °C. The graph is not drawn to scale. 3.2.1 Define the term boiling point in words. 3.2.2 Write down the boiling point of hydrochloric acid. 3.2.3 At which point, A or B, are the forces between HCl particles stronger? 3.2.4 Refer to the temperature, energy and movement of particles to explain the changes that take place between t₂ and t₃.

diffusionkinetic molecular theoryheating curvesboiling pointintermolecular forces
Open this question
2026 · Paper 2 · November · KwaZulu-Natal · Question 2

Grade 10 learners investigated the effect of increasing temperature on a sample of ethanol at standard atmospheric pressure. The temperature of the ethanol was recorded at regular time intervals and the results were used to construct the heating curve shown below, with flat sections B at −114,1 °C and D at 78,37 °C. 2.1 Define the term melting point. 2.2 Write down the: 2.2.1 value of the standard atmospheric pressure. 2.2.2 phase of ethanol at 0 °C.

heating curvesmelting pointphases of matterstandard pressure
Open this question
2026 · Paper 2 · November · KwaZulu-Natal · Question 2

2.3 Consider sections D and E of the heating curve of ethanol. 2.3.1 State whether the change occurring during section D is a PHYSICAL CHANGE or CHEMICAL CHANGE. Give a reason for your answer. 2.3.2 Explain why the temperature remains constant during section D but increases during section E, even though the ethanol is continuously heated. 2.4 In which region, A, C or E, are the forces between ethanol particles the strongest? 2.5 A gaseous mixture of ethanol and water is cooled at standard atmospheric pressure. The aim is to separate the two substances by cooling. 2.5.1 The mixture is initially at 110 °C. Select a suitable temperature from the following values to cause the water vapour to change into a liquid while the ethanol remains a gas: 50 °C, 75 °C, 90 °C or 105 °C. Give a reason for your choice. 2.5.2 Name the phase change that occurs when the water vapour changes into a liquid. 2.6 How does the average kinetic energy of the water particles compare to ethanol particles at 50 °C? Choose from GREATER THAN, LESS THAN or EQUAL TO.

heating curvesphysical changeintermolecular forcescondensationtemperature and kinetic energy
Open this question
2026 · Paper 2 · November · KwaZulu-Natal · Question 3

3.1 A scientist analyses a 1 000 g sample of seawater and obtains the following results: water (H₂O) 965 g; sodium chloride (NaCl) 27 g; magnesium chloride (MgCl₂) 3 g; magnesium sulphate 2 g; other substances 3 g. Note: the "other substances" do NOT contain any chloride ions (Cl⁻). 3.1.1 Is seawater a MIXTURE or a PURE SUBSTANCE? Give a reason for the answer. 3.1.2 Write down the chemical formula for magnesium sulphate. 3.1.3 Draw the Lewis structure for magnesium chloride (MgCl₂). 3.1.4 Determine the number of chloride ions (Cl⁻) in the 1000 g seawater sample. 3.2 Use the balanced chemical equation below to prove the law of conservation of mass: MgCl₂(aq) + 2NaOH(aq) → Mg(OH)₂(s) + 2NaCl(aq). 3.3 When aluminium hydroxide is heated, aluminium oxide and water are formed. 3.3.1 Write a balanced chemical equation for the above reaction. 3.3.2 Is the above reaction an example of a SYNTHESIS or DECOMPOSITION reaction? Explain your answer.

mixtures and pure substanceslewis diagramsthe mole conceptconservation of massdecomposition reactions
Open this question

Exam pages that include this topic

10 exam pages where states of matter and kinetic molecular theory appears alongside other topics: multiple-choice pages, and pages where one question ends and the next begins.

2025 · Paper 2 · June · KwaZulu-Natal · Question 1

1.1 Which of the following are conserved in a chemical reaction? A. Atoms and molecules. B. Mass and atoms. C. Mass, atoms and molecules. D. Mass and molecules. 1.2 Which ONE of the following is the name of group 2 elements in the periodic table? A. Alkali earth metals. B. Alkali metals. C. Halogens. D. Noble gases. 1.3 Which ONE of the following has the largest atomic radius? A. Na. B. Cl. C. K. D. Br. 1.4 What is the correct chemical formula for aluminium sulphite? A. Al₂SO₃. B. Al₂SO₄. C. Al₂(SO₃)₃. D. Al₂(SO₄)₃.

conservation of massgroups in the periodic tableatomic radiuschemical formulae
Open this question
2025 · Paper 2 · June · KwaZulu-Natal · Question 2,3

2.2 Sodium carbonate reacts with hydrochloric acid as indicated in the unbalanced chemical equation below: Sodium carbonate(s) + HCl(aq) → Sodium chloride(aq) + Carbon dioxide(g) + Water(l). 2.2.1 Write down a balanced chemical equation for the reaction, using chemical formulae. 2.2.2 What does the (aq) in the reaction indicate? 2.2.3 What visible change is noticed in the solution due to the formation of carbon dioxide? Provide a reason for this observation. 2.3 The reaction between FeCl₃ and sodium hydroxide is represented by the balanced chemical equation below: FeCl₃ + 3NaOH → Fe(OH)₃ + 3NaCl. 2.3.1 Write down the chemical name of FeCl₃. 2.3.2 Use the balanced chemical equation above to show that mass is conserved in a chemical reaction. QUESTION 3. The table below shows the melting and boiling points of three different substances: A melts at −78 °C and boils at −33 °C; B melts at 0 °C and boils at 100 °C; C melts at 16 °C and boils at 118 °C. 3.1 Define the term melting point in words. 3.2 Write down the letter (A, B or C) of the substance which: 3.2.1 Is a gas at room temperature (25 °C). 3.2.2 Is solid at 10 °C. 3.2.3 Represents water. 3.2.4 Has the strongest force between particles. Give a reason for the answer.

balancing chemical equationsconservation of masschemical changemelting and boiling pointsintermolecular forces
Open this question
2025 · Paper 2 · June · KwaZulu-Natal · Question 3,4

3.3 Use the information in the table above to sketch the heating curve of Substance C. (No time values are required on the x-axis.) Take the initial temperature as 10 °C and the final temperature as 120 °C on the y-axis. Show the following values on the heating curve: the melting point; the boiling point; the initial and final temperatures. 3.4 Explain why the temperature of a liquid decreases when evaporation takes place. QUESTION 4. The first ionization energies of Group 1 elements, in the periodic table, are shown in the table below: H 1312 kJ·mol⁻¹; Li 520 kJ·mol⁻¹; Na 496 kJ·mol⁻¹; K 419 kJ·mol⁻¹. 4.1 Define the term ionization energy in words. 4.2 Explain why the first ionization energy decreases from top to bottom in the group. 4.3 Is the ionization energy of Oxygen GREATER THAN, LESS THAN or EQUAL TO 520 kJ·mol⁻¹? Give a reason for the answer. 4.4 Describe the trend in reactivity of group 1 elements, from top to bottom in the group. Provide a reason for this trend using information from the table above.

heating curvesevaporationionisation energyperiodic trendsreactivity of group 1 elements
Open this question
2024 · Paper 2 · June · KwaZulu-Natal · Question 1

1.1 Which one of the following statements is CORRECT for the evaporation of water? A. Evaporation occurs only at 100 °C. B. The temperature of the remaining water increases when evaporation takes place. C. The temperature of the remaining water decreases when evaporation takes place. D. The temperature of the remaining water remains constant when evaporation takes place. 1.2 Which ONE of the following elements has atoms that have 7 valence electrons in the third energy level? A. Nitrogen. B. Phosphorus. C. Chlorine. D. Fluorine. 1.3 Which of the following is an example of a physical change? A. Condensation of water vapour. B. Rusting of iron. C. The reaction between sodium hydroxide and hydrochloric acid. D. Decomposition of Hydrogen Peroxide.

evaporationvalence electronsenergy levelsphysical and chemical change
Open this question
2023 · Paper 2 · June · KwaZulu-Natal · Question 1

1.1 Which of the following combinations have the same number of electrons? A. H and H⁺. B. O and O²⁻. C. S²⁻ and Ar. D. Li⁺ and Cl⁻. 1.2 Which one of the following describes the energy released when an atom accepts electrons? A. Electronegativity. B. Ionisation energy. C. Electron Affinity. D. Ionic Bond. 1.3 Which of the following is an example of a chemical change? A. Dissolving table salt in water. B. Rusting of iron. C. Sublimation of dry ice. D. Filtration of sand and water mixture. 1.4 Consider the unbalanced chemical equation below: (NH₄)₃PO₄ + Pb(NO₃)₄ → Pb₃(PO₄)₄ + NH₄NO₃. Which ONE of the sets of coefficients will balance the equation? A. 1, 3, 1, 3. B. 4, 3, 1, 12. C. 2, 1, 6, 6. D. 2, 3, 2, 6.

ionselectron affinityphysical and chemical changebalancing chemical equations
Open this question
2026 · Paper 2 · June · KwaZulu-Natal · Question 3

2.6 Sketch a well-labelled heating or cooling curve but showing a process that opposes the one above. Indicate all relevant temperatures on the graph. No time values are required on the x-axis. QUESTION 3. Chlorine is a non-metallic element with an atomic number of 17 and can exist as isotopes. 3.1 Define the term isotopes. 3.2 Write down the: 3.2.1 Number of valence electrons in a chlorine atom. 3.2.2 Valency of chlorine. 3.2.3 Group for Cl in the periodic table. 3.2.4 Period for Cl in the periodic table. Natural chlorine consists of Cl-35 and Cl-37. 3.3 Calculate the relative % abundance of the isotope Cl-35 in natural chlorine if the relative atomic mass of chlorine is 35.5 (AMU).

heating curvesisotopesvalence electronspercentage abundancerelative atomic mass
Open this question
2025 · Paper 2 · November · KwaZulu-Natal · Question 1

1.1 Which one of the following is an example of a pure substance? A. Carbon dioxide. B. Air. C. Steel. D. Aqueous sodium chloride. 1.2 Which one of the following has the highest first ionization energy? A. Li. B. F. C. Na. D. Cl. 1.3 Which of the following is true for the process of condensation? A. The substance is heated and changes phase to gas. B. The substance is heated and changes phase to liquid. C. The substance is cooled and changes phase to gas. D. The substance is cooled and changes phase to liquid.

mixtures and pure substancesionisation energycondensationphase changes
Open this question
2025 · Paper 2 · November · KwaZulu-Natal · Question 3

2.2 Ammonium sulphate is one of the most common fertilizers used worldwide. Ammonia reacts with sulphuric acid (hydrogen sulphate) to form ammonium sulphate. 2.2.1 Write a balanced chemical equation for the above reaction. 2.2.2 Is the above reaction an example of a SYNTHESIS or DECOMPOSITION reaction? 2.3 A farmer chooses to use ammonium nitrate (NH₄NO₃) as a fertilizer. He needs to supply 30 kg of NITROGEN to a field. 2.3.1 Calculate the percentage nitrogen (N) in ammonium nitrate (NH₄NO₃). 2.3.2 Determine the mass of ammonium nitrate (NH₄NO₃) required. 2.4 Use the balanced chemical equation below to prove the law of conservation of mass: 4NH₃ + 5O₂ → 4NO + 6H₂O. QUESTION 3. 3.1 A teacher performs a demonstration using ammonia (NH₃) and hydrochloric acid (HCl) GASES in a long glass tube. Ammonia and hydrochloric acid are simultaneously released from opposite ends of a long glass tube. A white ring of ammonium chloride (NH₄Cl) forms where the gases react.

balancing chemical equationssynthesis reactionspercentage compositionconservation of massdiffusion
Open this question
2026 · Paper 2 · November · KwaZulu-Natal · Question 1

1.1 Which ONE of the following is a mixture? A. KCl(s). B. NaCl(aq). C. H₂O(l). D. CO₂(g). 1.2 When atom Y of an element in Group 17 (VII) forms the ion Y⁻, the… A. Mass number of Y increases. B. Atomic number of Y decreases. C. Number of protons decreases. D. Number of electrons increases. 1.3 The energy released when an electron is attached to an atom or molecule to form a negative ion is… A. Electron affinity. B. Electronegativity. C. Ionisation energy. D. First ionisation energy. 1.4 Which ONE of the following contains the largest number of atoms? A. 18 g of H₂O. B. 22 g of CO₂. C. 32 g of O₂. D. 17 g of NH₃.

mixtures and pure substancesionselectron affinitythe mole concept
Open this question
2026 · Paper 2 · November · KwaZulu-Natal · Question 1

1.5 Consider the following statements regarding evaporation: (i) Evaporation occurs only at the surface of a liquid. (ii) Evaporation can occur at temperatures below the boiling point. (iii) The temperature of the remaining liquid decreases during evaporation. Which of the above statement(s) is/are TRUE? A. (i) only. B. (i) and (ii) only. C. (ii) and (iii) only. D. (i), (ii) and (iii). 1.6 Consider the unbalanced chemical equation below: C₂H₆ + O₂ → CO₂ + H₂O. Which ONE of the sets of coefficients will balance the equation? A. 2, 6, 4, 6. B. 2, 7, 4, 6. C. 4, 7, 4, 6. D. 1, 4, 2, 3. 1.7 Consider the balanced chemical equation for the reaction below: CH₄(g) + H₂O(g) → CO(g) + 3H₂(g). The number of H₂O molecules required to form 44,8 dm³ of H₂ at STP is… A. ½ × 6,02 × 10²³. B. ⅓ × 6,02 × 10²³. C. ⅔ × 6,02 × 10²³. D. 2 × 6,02 × 10²³.

evaporationbalancing chemical equationsmolar volume at stpstoichiometric ratios
Open this question

Next topic

Carry on through the Grade 10 curriculum.

The Atom and Periodic Table past paper questions

Descriptions last updated 14 November 2026.